The 2014 US Farm Bill allows states that have passed their own industrial hemp legislation to grow industrial hemp for purposes of research and development. Several states — including Kentucky, Colorado, and Oregon — are already conducting hemp pilot projects. Many other states are currently pursuing similar legislation and programs. After many years of prohibition, American farmers are finally reacquainting themselves with industrial hemp.
Yes, and no. Hemp itself is an A+plus source of omega-3 and omega-6 fatty acids. In fact, it has the 3:1 ratio of omega-6 to omega-3 that research shows is optimal for health. One of those omega-6s is GLA, or gamma linolenic acid, an anti-inflammatory. That's why hemp-based food products, like hemp hearts and hemp milk, are gaining reps as legit superfoods.
Scutching: Passing the stalks through a series of rollers to break apart the hemp fibers. During this step, the woody core is pushed out and separated from the pliable fibers. This is another step where proper drying comes into play. The sweet spot between 10% and 15% moisture is key here. If the stalks are too dry, they will be crushed into a powder. If they are too moist, they won’t break and separate properly.
"The survey covers the harvest of 2013, related to a total cultivation area of 15,700 ha. The first figure shows the development of the cultivation area since 1993. Between 1993 and 1996 the cultivation of industrial hemp was legalised in most of the member states, others followed later. In 2011 the cultivation area decreased to its lowest value since 1994 (ca. 8,000 ha), but increased in 2012, 2013 and 2014, to finally reach 25,000 ha in 2015. In 2016 a further increase is expected. The main cultivation member states are France and The Netherlands. In recent years, many new European countries started or expanded their hemp cultivation, mainly for the production of hemp seeds.
Thapa, D., Toguri, J. T., Szczesniak, A. M., & Kelly, A. E. M. (2017, April 1). The non-psychoactive phytocannabinoid, cannabidiol (CBD), and the synthetic derivatives, HU308 and CBD-DMH, reduces hyperalgesia and inflammation in a mouse model of corneal injury [Abstract]. FASEB Journal. Retrieved from https://www.fasebj.org/doi/abs/10.1096/fasebj.31.1_supplement.811.7
First, you should not take anything without consulting your physician. While CBD oil is largely safe, a small number of people experience side effects and it could interact with medications you may already be taking like certain antidepressants and antibiotics. Do not be shy about discussing this option, the more open and honest you can be with your doctor, the more they can help you figure out the best path forward if you are considering using CBD oil for pain.
A hundred years ago, what Martin Lee describes, was common to all pharmaceuticals. Drugs were generally made from dried plants ( the Dutch word “Drug” derives from the word for “dry”) that a pharmacist ground into powder and extracted. Standardizing the growing conditions was difficult. Ultimately, standardization was a matter of isolating the active ingredient and making pure crystals of it, then weighing out the crystals milligram by milligram, to mix the finished medicine.
The farm bill is a sprawling piece of legislation that sets U.S. government agricultural and food policy for the country and is renewed roughly every five years. This version of the bill places industrial hemp — which is defined as a cannabis plant with under 0.3% of tetrahydrocannabinol, or THC — under the supervision of the Agriculture Department and removes CBD from the purview of the Controlled Substances Act, which covers marijuana. The law also “explicitly” preserved the Food and Drug Administration’s authority to regulate products containing cannabis, or cannabis-derived compounds. 

A 2011 study evaluated the effects of two non-psychoactive cannabinoids, cannabidiol (CBD) and cannabichromene (CBC), on pain management. The study concluded that, “CBD and CBC stimulated descending pathways of antinociception and caused analgesia by interacting with several target proteins involved in nociceptive control. These compounds might represent useful therapeutic agents with multiple mechanisms of action.”
I assume this is also a side effect of the eased anxiety, but I seem to fall asleep within the 20- to 30-minute range rather than my normal 45 minutes to one hour (or longer). Not only do I seem to be skipping (or at least shortening) the whole tossing-and-turning phase of my sleep cycle, but I'm able to snap out of the overthinking mindset that often keeps me up at night. Of course, there's no telling whether a big life event would kindly disrupt this newfound bliss, but I'd like to think it's helped on day-to-day basis.
Health.com is part of the Meredith Health Group. ©, Copyright 2019 Meredith Corporation. All rights reserved. The material in this site is intended to be of general informational use and is not intended to constitute medical advice, probable diagnosis, or recommended treatments. All products and services featured are selected by our editors. Health.com may receive compensation for some links to products and services on this website. Offers may be subject to change without notice. See the Terms of Servicethis link opens in a new tab and Privacy Policythis link opens in a new tab (Your California Rightsthis link opens in a new tab)for more information. Ad Choicesthis link opens in a new tab | EU Data Subject Requeststhis link opens in a new tab
CBD Pain Cream is here to help you live a higher quality life. If you suffer from pain, hypertension, or other conditions that leave you struggling to get through your day, this cream is here to help.  † Because, it uses the power of Cannabidiol to erase pain, discomfort, and other effects from conditions from the outside in. If you especially have pain in certain areas of your body, say your back from an injury or your hands from arthritis, CBD Pain Cream can seriously help you. †
A CNN program that featured Charlotte's Web cannabis in 2013 brought increased attention to the use of CBD in the treatment of seizure disorders.[67][68] Since then, 16 states have passed laws to allow the use of CBD products with a doctor's recommendation (instead of a prescription) for treatment of certain medical conditions.[69] This is in addition to the 30 states that have passed comprehensive medical cannabis laws, which allow for the use of cannabis products with no restrictions on THC content.[69] Of these 30 states, eight have legalized the use and sale of cannabis products without requirement for a doctor's recommendation.[69]
Outside of the aforementioned studies, CBD’s progress toward its place in society today suffered from intermittent spurts and starts until 1996 when California became the first US state to legalize medical cannabis. This groundbreaking moment paved the way for public support and lucrative research opportunities. Other states including Oregon, Alaska, Washington, Maine, Hawaii, Nevada, and Colorado would follow suit before the close of 2000.

Put simply, “indica” strains are those associated with a strong body-high, feelings of sedation and relaxation. For this reason, indicas are often thought of as the “heavier” strains of cannabis, offering stronger highs that impact the whole body. They’re popular among marijuana users as pain relieving and sleep-inducing strains. Indicas are especially popular among medical cannabis patients.
The clinical trials performed with Sativex have recently been assessed in two independent review articles (Barnes 2006; Pérez 2006). In a Phase II clinical trial in 20 patients with neurogenic symptoms (Wade et al 2003), Tetranabinex, Nabidiolex, and Sativex were tested in a double-blind RCT vs placebo (Table 1). Significant improvement was seen with both Tetranabinex and Sativex on pain (especially neuropathic), but post-hoc analysis showed symptom control was best with Sativex (p < 0.0001), with less intoxication than with THC-predominant extract.
“This is a really powerful compound,” says Mikhail Kogan, the medical director of the George Washington University Center for Integrative Medicine. “I’ve seen it work for a lot of my patients.” He prescribes high-CBD strains of cannabis regularly for such illnesses as epilepsy, post-traumatic stress disorder, anxiety, autoimmune disorders, autism and insomnia.
A few years ago, the National Academy of Medicine convened a panel of sixteen leading medical experts to analyze the scientific literature on cannabis. The report they prepared, which came out in January of 2017, runs to four hundred and sixty-eight pages. It contains no bombshells or surprises, which perhaps explains why it went largely unnoticed. It simply stated, over and over again, that a drug North Americans have become enthusiastic about remains a mystery.
The 2018 Farm Bill will radically overhaul America’s relation to hemp and could unleash a hemp renaissance in the coming years that will close the gap between the U.S. and China. As a Schedule 1 substance alongside marijuana, hemp farmers and entrepreneurs in the U.S. have faced many barriers to doing business. Interstate commerce for hemp products was almost non-existent and financing was difficult to come by. But all that is set to change.
Public health has been described as "the science and art of preventing disease, prolonging life and promoting health through the organized efforts and informed choices of society, organizations, public and private, communities and individuals."[52] It is concerned with threats to the overall health of a community based on population health analysis. The population in question can be as small as a handful of people or as large as all the inhabitants of several continents (for instance, in the case of a pandemic). Public health has many sub-fields, but typically includes the interdisciplinary categories of epidemiology, biostatistics and health services. Environmental health, community health, behavioral health, and occupational health are also important areas of public health.
"Because of the compositional differences between the drug and fiber varieties of cannabis, farmers growing either crop would necessarily want to separate production of the different varieties or cultivars. This is particularly true for growers of medicinal or recreational marijuana in an effort to avoid cross-pollination with industrial hemp, which would significantly lower the THC content and thus degrade the value of the marijuana crop. Likewise, growers of industrial hemp would seek to avoid cross-pollination with marijuana plants, especially given the illegal status of marijuana. Plants grown of oilseed are also marketed according to the purity of the product, and the mixing of off-type genotypes would degrade the value of the crop.8
By the 1930s, marijuana was banned in 24 states. The newly minted Federal Bureau of Narcotics launched a campaign against the drug, and newspapers fueled hysteria with headlines like the 1933 Los Angeles Examiner's "Murder Weed Found Up and Down the Coast — Deadly Marihuana Dope Plant Ready for Harvest That Means Enslavement of California Children." By 1937, Congress passed the Marihuana Tax Act, which effectively banned marijuana except for a few medicinal purposes, according to "Smoke Signals: A Social History of Marijuana – Medical, Recreational and Legal" (Scribner, 2012).
Outside of the aforementioned studies, CBD’s progress toward its place in society today suffered from intermittent spurts and starts until 1996 when California became the first US state to legalize medical cannabis. This groundbreaking moment paved the way for public support and lucrative research opportunities. Other states including Oregon, Alaska, Washington, Maine, Hawaii, Nevada, and Colorado would follow suit before the close of 2000.
Fiberboard. In North America the use of nonwood fibers in sheet fiberboard (“pressboard” or “composite board”) products is relatively undeveloped. Flax, jute, kenaf, hemp, and wheat straw can be used to make composite board. Wheat straw is the dominant nonwood fiber in such applications. Although it might seem that hemp bast fibers are desirable in composite wood products because of their length and strength, in fact the short fibers of the hurds have been found to produce a superior product (K. Domier, pers. commun.). Experimental production of hemp fiberboard has produced extremely strong material (Fig. 22). The economic viability of such remains to be tested. Molded fiberboard products are commercially viable in Europe (Fig. 23), but their potential in North America remains to be determined.
The Spaniards brought hemp to the Americas and cultivated it in Chile starting about 1545.[117] Similar attempts were made in Peru, Colombia, and Mexico, but only in Chile did the crop find success.[118] In July 1605, Samuel Champlain reported the use of grass and hemp clothing by the (Wampanoag) people of Cape Cod and the (Nauset) people of Plymouth Bay told him they harvested hemp in their region where it grew wild to a height of 4 to 5 ft. [119] In May 1607, "hempe" was among the crops Gabriel Archer observed being cultivated by the natives at the main Powhatan village, where Richmond, Virginia is now situated;[120] and in 1613, Samuell Argall reported wild hemp "better than that in England" growing along the shores of the upper Potomac. As early as 1619, the first Virginia House of Burgesses passed an Act requiring all planters in Virginia to sow "both English and Indian" hemp on their plantations.[121] The Puritans are first known to have cultivated hemp in New England in 1645.[117]

With that stereotype now changing in addition to the outbreak of legal marketplaces in 33 states, we’re seeing a boom in cross-industry trends where major corporate and investment players are starting to enter the cannabis sector or at least signal willingness to do so. These trends are proving so strong that companies are starting to think it’s important to get in the game or risk being left behind later. That’s why major brands are either dipping a toe into the water or laying the groundwork for a cannonball-level splash when the Green Rush finally breaks.
So true. Hearst and Rockefeller did not want Hemp or any form of Cannabis interfering with their lucrative paper, pharmaceutical and oil industries. Hemp is versatile and renewable. It can be used for food, medicine, fuel, paper, clothing, plastic, building materials; just about anything paper and oil is used for. These bastard wealthy people have done a disservice to all people and for the sake of lining their already copiously rich pockets. They and those like them are criminals of the worst order
In the United States, the public's perception of hemp as marijuana has blocked hemp from becoming a useful crop and product,"[55] in spite of its vital importance prior to World War II.[56] Ideally, according to Britain's Department for Environment, Food and Rural Affairs, the herb should be desiccated and harvested towards the end of flowering. This early cropping reduces the seed yield but improves the fiber yield and quality.[57] In these strains of industrial hemp* the tetrahydrocannabinol (THC) content would have been very low.[55]
In general, the majority of people end up using higher-strength products for pain than they would for things like anxiety, stress, or depression. The majority of today’s best CBD oil manufacturers offer tinctures in three different “potencies,” usually in 100, 300, or 600 mg options. Many people start on a middle ground with a 300 mg option, and work your way up from there, but it is extremely important to consult with the brand you are purchasing from before consumption.

Medical cannabis, or medical marijuana, can refer to the use of cannabis and its cannabinoids to treat disease or improve symptoms; however, there is no single agreed-upon definition.[39][40] The rigorous scientific study of cannabis as a medicine has been hampered by production restrictions and other federal regulations.[41] There is limited evidence suggesting cannabis can be used to reduce nausea and vomiting during chemotherapy, to improve appetite in people with HIV/AIDS, and to treat chronic pain and muscle spasms.[42][43][44] Its use for other medical applications is insufficient for conclusions about safety or efficacy.
"The presence of THC in these products has been a source of concern for the military and other workplace drug-testing programs. Ingestion of hemp products has been historically used as a defense in military and civilian trials for many years and continues today despite decreased concentrations of THC in hemp products (10-12). The Division of Forensic Toxicology, Armed Forces Institute of Pathology is often asked to analyze hemp products to determine their THC content in addition to rendering an opinion as to whether or not this THC concentration could be a reasonable cause for a positive THC metabolite urine analysis result."
Conditions like rheumatoid arthritis and lupus impact the immune system which can lead to achy joints. These autoimmune disorders occur, in part, because the immune system is unable to recognize the body’s natural processes and begins to attack and destroy the wrong cells. Cannabinoids like CBD act as immune suppressors, reducing or eliminating this undesired immune response. Current testing and research shows positive results and as more studies are done, we will get a better picture of the ways in which CBD may be able to provide relief.
"In recent years, U.S. producers have begun to grow hemp under state law (Table 2). Some are foregoing the requirement to obtain a federal permit. For example, in 2009, Montana’s Agriculture Department issued its first state license for an industrial hemp-growing operation in the state, and media reports indicated that the grower did not intend to request a federal permit.72 Such cases continue to pose a challenge to DEA of whether it is willing to override the state’s authority to allow for hemp production in the state. It is also a test of states’ rights."
Fig. 8. Scanning electron micrographs of the abaxial surface of a perigonal bract (which envelops the fruit). These bracts are the most intoxicating part of the plant, and may contain 20% THC, dry weight. The resin is synthesized both in stalked and sessile glands. Multicellular secretory glands (of phallic appearance), some broken stalks of these (note cellular appearance), and unicellular cystolith hairs (claw-like structures) are pictured. Fig. 9. Some important cannabinoids of cannabis resin. D9-THC (delta-9 tetrahydrocannabinol) is the chief intoxicant chemical and predominates in intoxicant strains, while the isomer D8-THC is usually present in no more than trace amounts. CBD (cannabidiol) is the chief non-intoxicant chemical, and predominates in non-intoxicant strains; it has sedative effects. The non-intoxicant CBN (cannabinol) is a frequent degradation or oxidation product. The non-intoxicant cannabichromene (CBC) is typically found in trace amounts in intoxicant strains. The non-intoxicant cannabigerol (CBG) is considered to be a precursor of the other cannbinoids (see Fig. 10).
"Because of the compositional differences between the drug and fiber varieties of cannabis, farmers growing either crop would necessarily want to separate production of the different varieties or cultivars. This is particularly true for growers of medicinal or recreational marijuana in an effort to avoid cross-pollination with industrial hemp, which would significantly lower the THC content and thus degrade the value of the marijuana crop. Likewise, growers of industrial hemp would seek to avoid cross-pollination with marijuana plants, especially given the illegal status of marijuana. Plants grown of oilseed are also marketed according to the purity of the product, and the mixing of off-type genotypes would degrade the value of the crop.8

Tammy et al, Through trial and error you will find a correct dosage. Try 50 mg daily....25 each 2x daily....if no results up the dosage until it works for you. Remember, there has never been a death from marijuana or CBD use. You might want to try a tincture or rub with CBD and THC. You won't get the psych high from it. Helps my friend with PArkinsons tremors. She takes 50mg of tincture and uses the rub morning and night. It is a miracle for arthritis. Good luck


^ Morales P, Hurst DP, Reggio PH (2017). Kinghorn AD, Falk H, Gibbons S, Kobayashi J, eds. "Molecular Targets of the Phytocannabinoids: A Complex Picture". Progress in the Chemistry of Organic Natural Products. Progress in the Chemistry of Organic Natural Products. Springer International Publishing. 103: 103–131. doi:10.1007/978-3-319-45541-9_4. ISBN 978-3-319-45539-6. PMC 5345356. PMID 28120232.
A few years ago, the National Academy of Medicine convened a panel of sixteen leading medical experts to analyze the scientific literature on cannabis. The report they prepared, which came out in January of 2017, runs to four hundred and sixty-eight pages. It contains no bombshells or surprises, which perhaps explains why it went largely unnoticed. It simply stated, over and over again, that a drug North Americans have become enthusiastic about remains a mystery.
The problem is, it’s not easy to know what you’re actually ingesting, or if it’ll actually change how you feel. At best, CBD in America exists in a confusing state of quasi-legality and yet-to-be-realized potential. Experts estimate that the market for it could balloon to $22 billion by 2022, but with cannabis and hemp laws changing rapidly across the country, the chemical is almost entirely unregulated on the consumer market, with no end-product labeling or composition standards to help shoppers understand what they’re buying.
Executives from Canopy Growth CGC, -1.22% WEED, -1.27%  and rival Aurora Cannabis Inc. ACB, -0.88% ACB, -0.83%  both discussed their hemp operations on September-quarter earnings calls that included disappointing results related to early recreational pot sales. Aurora declined to comment on the latest developments and Canopy did not make executives available by the time of publication.
Hemp is a bast fiber crop, i.e. the most desirable (“long”) fibers are found in the phloem-associated tissues external to the phloem, just under the “bark.” The traditional and still major first step in fiber extraction is to ret (“rot”) away the softer parts of the plant, by exposing the cut stems to microbial decay in the field (“dew retting,” shown in Figs. 46 and 47) or submerged in water (“water retting, ” shown in Fig. 13). The result is to slough off the outer parts of the stem and to loosen the inner woody core (the “hurds”) from the phloem fibers (Fig. 14). Water retting has been largely abandoned in countries where labor is expensive or environmental regulations exist. Water retting, typically by soaking the stalks in ditches, can lead to a high level of pollution. Most hemp fiber used in textiles today is water retted in China and Hungary. Retting in tanks rather than in open bodies of water is a way of controlling the effluents while taking advantage of the high-quality fiber that is produced. Unlike flax, hemp long fiber requires water retting for preparation of high-quality spinnable fibers for production of fine textiles. Improved microorganisms or enzymes could augment or replace traditional water retting. Steam explosion is another potential technology that has been experimentally applied to hemp (Garcia-Jaldon et al. 1998). Decorticated material (i.e. separated at least into crude fiber) is the raw material, and this is subjected to steam under pressure and increased temperature which “explodes” (separates) the fibers so that one has a more refined (thinner) hemp fiber that currently is only available from water retting. Even when one has suitably separated long fiber, specialized harvesting, processing, spinning and weaving equipment are required for preparing fine hemp textiles. The refinement of equipment and new technologies are viewed as offering the possibility of making fine textile production practical in western Europe and North America, but at present China controls this market, and probably will remain dominant for the foreseeable future.

^ Russo, E. B.; Jiang, H.-E.; Li, X.; Sutton, A.; Carboni, A.; Del Bianco, F.; Mandolino, G.; Potter, D. J.; Zhao, Y.-X.; Bera, S.; Zhang, Y.-B.; Lü, E.-G.; Ferguson, D. K.; Hueber, F.; Zhao, L.-C.; Liu, C.-J.; Wang, Y.-F.; Li, C.-S. (2008). "Phytochemical and genetic analyses of ancient cannabis from Central Asia". Journal of Experimental Botany. 59 (15): 4171–82. doi:10.1093/jxb/ern260. PMC 2639026. PMID 19036842.
Did you get an answer for this? I have the exact same scenario. I'm treating my TN with Tegretol, and recently tried CBD. I think I took too much and there are some weird drug interactions with Tegretol and I felt quite stoned....was alone and talking to myself in my head thinking I was Einstein. It freaked me out a bit but I think I took too much. I'm trying lower doses again as recently my TN seems to be resisting the meds, although I have had a lot of emotional stress, which seems to be a trigger. Thanks!! Anna

While normally I'd be slightly tripped up by little things like an overly crowded subway car or a full inbox at work, the CBD oil seems to have taken the edge off of my anxiety a bit. Rather than overthinking a sternly worded email or analyzing a social interaction, I've found it easier to recognize the irrationality of these thoughts and actually let them go (instead of ruminating on the situation). In some ways, I feel more like myself. With that said, I've still experienced some social anxiety when meeting new groups of people—I'd be interested to see what taking the full recommended dose would do.


A study by Henquet and colleagues (2004) substantially replicated both the Swedish and Dutch studies in a 4-year follow-up of a cohort of 2437 adolescents and young adults between 1995 and 1999 in Munich. They found a dose–response relationship between self-reported cannabis use at baseline and the likelihood of reporting psychotic symptoms. As in the Dutch cohort, young people who reported psychotic symptoms at baseline were much more likely to experience psychotic symptoms at follow-up if they used cannabis than were cannabis-using peers without such a history.

Earliest reference to euphoric use of C. sativa appears to date to China of 5 millennia ago, but it was in India over the last millennium that drug consumption became more firmly entrenched than anywhere else in the world. Not surprisingly, the most highly domesticated drug strains were selected in India. While C. sativa has been used as a euphoriant in India, the Near East, parts of Africa, and other Old World areas for thousands of years, such use simply did not develop in temperate countries where hemp was raised. The use of C. sativa as a recreational inebriant in sophisticated, largely urban settings is substantially a 20th century phenomenon.
Based on world production of fibers in 1999, about 54.5% was synthetic (of which 60.3% was polyester), 42.9% was plant fiber (of which 78.5% was cotton), and 2.6% was wool (Karus 2000). In addition to cotton, flax is the only other significant plant fiber crop grown in temperate regions of the world (kenaf has received some enthusiastic backing in the southern US in recent years, but is most cheaply produced in India, Bangladesh, and China). Flax held 2.7% of the world plant fiber market in 1999, while hemp had only 0.3% (Karus 2000). Hemp fiber can potentially replace other biological fibers in many applications, but also, as noted below, can sometimes compete with minerals such as glass fiber and steel. As forests diminish, cultivation of annual plants as fiber sources is likely to increase. While crop residues like cereal straw will probably supply much of the need, specialty fiber plants such as hemp also have potential. The four conditions that will need to be met are (after Bolton 1995): (1) the material should be produced at a large enough scale; (2) the price should be low enough; (3) the fiber characteristics should be adequate for the end use; and (4) proven technology should be available for the processing of the new raw material. Of these criteria only point 3 is adequately met at this time for hemp in North America, but this is to be expected in a crop that has only begun to be cultivated after an absence of many years.
Yes, and no. Hemp itself is an A+plus source of omega-3 and omega-6 fatty acids. In fact, it has the 3:1 ratio of omega-6 to omega-3 that research shows is optimal for health. One of those omega-6s is GLA, or gamma linolenic acid, an anti-inflammatory. That's why hemp-based food products, like hemp hearts and hemp milk, are gaining reps as legit superfoods.

More recently, Sakamoto and various co-authors[35][36] have used RAPD to isolate several genetic marker sequences that they name Male-Associated DNA in Cannabis (MADC), and which they interpret as indirect evidence of a male chromosome. Several other research groups have reported identification of male-associated markers using RAPD and AFLP.[37][25][38] Ainsworth commented on these findings, stating,
Fiberboard. In North America the use of nonwood fibers in sheet fiberboard (“pressboard” or “composite board”) products is relatively undeveloped. Flax, jute, kenaf, hemp, and wheat straw can be used to make composite board. Wheat straw is the dominant nonwood fiber in such applications. Although it might seem that hemp bast fibers are desirable in composite wood products because of their length and strength, in fact the short fibers of the hurds have been found to produce a superior product (K. Domier, pers. commun.). Experimental production of hemp fiberboard has produced extremely strong material (Fig. 22). The economic viability of such remains to be tested. Molded fiberboard products are commercially viable in Europe (Fig. 23), but their potential in North America remains to be determined.
Kent, My mother has suffered from severe migraines since she was a child. Six weeks ago, she received the hemp oil tincture (I do not know what dosage). She does not take it daily. She rubs a drop or two on her temples at the start of a migraine. The drops worked more effectively for her than her medication did, and now that is all she uses. Hope this helps.
"Comparisons of industrial hemp to hydrocarbon or other conventional industrial feedstocks show that, generally, hemp requires substantially less energy for manufacturing, often is suited to less-toxic means of processing, and provides competitive product performance (especially in terms of durability, light weight, and strength), greater recyclability and/or biodegradability, and a number of value-added applications for byproducts and waste materials at either end of the product life cycle."
I have digenerative disc disease/4 bulgin discs was taking 9---10mg hydrocodones a day... i started with 3 drops of 300mg and within 5 mins started feeling better than i have theses last 6 years or so... not only that, the inflamation has decrease substantially, i wake up with energy and have begun to work out again... if im making it seem like a miracle drug... its because it is... so the first week i took 3 drops twice a day... now 3 weeks in... im taking about 5 drops 3 times a day and zero pain pills... for the first time in years i have taken control of my life agin... not depending on doctor scripts/bills etc....
×