This guide is an introduction to anyone looking to inform themselves about the reality of cannabis. It covers basic information about the marijuana plant, cannabis preparations, and the crucial elements of plant anatomy and science. This guide to marijuana also gives an overview of the most popular medical and recreational uses of cannabis. It offers a survey of the most important medical cannabis research while highlighting emerging trends in the legal cannabis market. The guide also introduces those new to cannabis to the many ways to consume marijuana, and much more.

had relief. I also rubbed some on a couple of sour spots near my back, and it seems to have helped. Im also, in a better mood, I feel more alert and more full of energy. Now, I haven’t been taking it long enough to make a full decision on its benefits, but for now I’m going to continue the use of it because it seems to be working. I believe it to be the thing of the future!
Whether the chronic pain is in your back, neck, hands, feet, or elsewhere – CBD can help! In order to understand how CBD helps provide pain relief, we turn to a series of medical studies that have been conducted over the past ten years. These studies evaluated CBD’s medical efficacy in treating those who suffer from various types of pain. We will address the results below.
"Hemp hurd is composed of cellulose-rich, short fibres, and make up approximately 75% of the hemp stalk. They are spongy and absorbent, ideal characteristics in applications such as animal bedding and industrial absorbents. They may also be used to produce low-quality paper. More recently, hemp hurd has been used to produce a concrete-like substance for use in building applications, as well as for insulation and to produce fibreboard."
Despite, its low potency, the effects of this product were faster. In about an hour, my back pain was relieved considerably enough for me to work around and do daily chores. Remember though, this product did not, even with regular use, bring down my back pain to a level that was to my absolute liking. However, it did help me a lot with my sleep terrors and anxiety.

“THC can be present in products advertised as CBD products, which are not regulated by the FDA. The presence of THC in urine would trigger a positive result on a drug test. Testing will not determine if THC is from CBD or marijuana use," March wrote to WECT about the NHRMC note. “We have advised employees that using CBD products could put them at risk for a positive drug test result.”
"The DEA followed up, in October 2001, with publication of an interpretive rule in the Federal Register explaining the basis of its zero-tolerance standard.63 It held that when Congress wrote the statutory definition of marijuana in 1937, it 'exempted certain portions of the Cannabis plant from the definition of marijuana based on the assumption (now refuted) that such portions of the plant contain none of the psychoactive component now known as THC.' Both the proposed rule (which was published concurrently with the interpretive rule) and the final 2003 rule gave retailers of hemp foods a date after which the DEA could seize all such products remaining on shelves. On both rules, hemp trade associations requested and received court-ordered stays blocking enforcement of that provision. The DEA’s interpretation made hemp with any THC content subject to enforcement as a controlled substance.
The tricky part is that there's some evidence suggesting CBD works best for pain when combined with a little THC, says Dr. Danesh. "Depending on what type of pain you have, you might be able to do just CBD, but sometimes you need CBD and THC." This makes accessing a product that will actually help you more difficult due to different regulations in each state. In New York, where Dr. Danesh practices, for example, CBD is available over the counter. But as soon as you add THC, you need a prescription.
There are practical, if cruder alternatives to separate the long fiber for high-quality textile production, but in fact such techniques are used mostly for non-textile applications. This involves production of “whole fibers” (i.e. harvesting both the long fibers from the cortex and the shorter fibers from throughout the stem), and technologies that utilize shortened hemp fibers. This approach is currently dominant in western Europe and Canada, and commences with field dew retting (typically 2–3 weeks). A principal limitation is climatic—the local environment should be suitably but not excessively moist at the close of the harvest season. Once stalks are retted, dried, and baled, they are processed to extract the fiber. In traditional hemp processing, the long fiber was separated from the internal woody hurds in two steps, breaking (stalks were crushed under rollers that broke the woody core into short pieces, some of which were separated) and scutching (the remaining hurds, short fibers (“tow”) and long fibers (“line fiber, ” “long-line fiber”) were separated). A single, relatively expensive machine called a decorticator can do these two steps as one. In general in the EU and Canada, fibers are not separated into tow and line fibers, but are left as “whole fiber.” In western Europe, the fiber is often “cottonized,” i.e. chopped into short segments the size of cotton and flax fiber, so that the fibers can be processed on flax processing machinery, which is very much better developed than such machinery is for hemp. In North America the use of hemp for production of even crude textiles is marginal. Accordingly, the chief current fiber usages of North American, indeed of European hemp, are non-textile.
• Is there a batch number? You know how you check your raw chicken or bagged lettuce every time there's a recall to make sure the one you bought isn't going to make you sick? You should be able to do that with CBD products too. "This is a huge indicator as to whether they are following good manufacturing practices," says Beatty. "There should be a way to identify this product in case it was improperly made so the company can carry out a recall." 

I always tell beginners for CBD use to use full-spectrum. The full-spectrum oils contain a lot of terpenes and other good stuff along with CBD and help much more when you suffer from anxiety attacks. CBDistillery also has a wide range of potencies to choose from. Unlike, FabCBD, which offers only limited capacities, CBDistillery’s oils go up to 5000mg per bottle and it is indeed one of the best CBD oils for pain in the market

PTSD. My husband suffers chronic PTSD from active military service. We live not far from a large Army base and though my husband served with another counties military we hear stories constantly of family breakdowns over PTSD. It’s not a easy path but I’m hoping one day to find something to stop the endless trips to the psych ward. It’s just not right that those who serve come home to no government help.
Highly selected forms of the fiber cultigen possess features maximizing fiber production. Since the nodes tend to disrupt the length of the fiber bundles, thereby limiting quality, tall, relatively unbranched plants with long internodes have been selected. Another strategy has been to select stems that are hollow at the internodes, with limited wood, since this maximizes production of fiber in relation to supporting woody tissues. Similarly, limited seed productivity concentrates the plant’s energy into production of fiber, and fiber cultivars often have low genetic propensity for seed output. Selecting monoecious strains overcomes the problem of differential maturation times and quality of male (staminate) and female (pistillate) plants (males mature 1–3 weeks earlier). Male plants in general are taller, albeit slimmer, less robust, and less productive. Except for the troublesome characteristic of dying after anthesis, male traits are favored for fiber production, in contrast to the situation for drug strains noted below. In former, labor-intensive times, the male plants were harvested earlier than the females, to produce superior fiber. The limited branching of fiber cultivars is often compensated for by possession of large leaves with wide leaflets, which obviously increase the photosynthetic ability of the plants. Since fiber plants have not generally been selected for narcotic purposes, the level of intoxicating constituents is usually limited.

More round, soft, and green than sesame seeds and slightly sweeter than sunflower seeds, hemp seeds can be used to make hemp nut butter with a slight greenish cast from the chlorophyll. The oil has been described as having a pleasantly nutty, slightly bitter taste, and off-yellow to dark green coloring. High in unsaturated fatty acids, it can easily oxidize, so it’s not recommended for frying or baking.


This is good news for the best CBD oil companies because the Farm Bill allows for the legal cultivation of industrial hemp, under certain circumstances, which can be a source of CBD. But CBD can also come from non-industrial hemp, namely the marijuana plant that most are more familiar with. Therefore, whether or not CBD oil for pain is legal can be a question of which “version” of the cannabis plant it was sourced from. If it was sourced from industrial hemp, (which contains less than 0.3% THC by volume), and it was cultivated under the Farm Bill, then it is legal.

Van Roekel (1994) has pointed out that Egyptian papyrus sheets are not “paper,” because the fiber strands are woven, not “wet-laid;” the oldest surviving paper is over 2,000 years of age, from China, and was made from hemp fiber (Fleming and Clarke 1998). Until the early 19th century, hemp, and flax were the chief paper-making materials. In historical times, hemp rag was processed into paper. Using hemp directly for paper was considered too expensive, and in any event the demand for paper was far more limited than today. Wood-based paper came into use when mechanical and chemical pulping was developed in the mid 1800s in Germany and England. Today, at least 95% of paper is made from wood pulp.


It is important to note that the federal government still considers cannabis a dangerous drug and that the illegal distribution and sale of marijuana is a serious crime. Under the Controlled Substances Act (CSA), marijuana is still considered a Schedule 1 drug. Cultivation and distribution of marijuana are felonies; possession for personal use is a misdemeanor; possession of “paraphernalia” is also illegal. Cultivating 100 plants or more carries a mandatory minimum sentence of five years according to federal statutes.
Both in Canada and the US, the most critical problem to be addressed for commercial exploitation of C. sativa is the possible unauthorized drug use of the plant. Indeed, the reason hemp cultivation was made illegal in North America was concern that the hemp crop was a drug menace. The drug potential is, for practical purposes, measured by the presence of THC. THC is the world’s most popular illicit chemical, and indeed the fourth most popular recreational drug, after caffeine, alcohol, and nicotine. “Industrial hemp” is a phrase that has become common to designate hemp used for commercial non-intoxicant purposes. Small and Cronquist (1976) split C. sativa into two subspecies: C. sativa subsp. sativa, with less than 0.3% (dry weight) of THC in the upper (reproductive) part of the plant, and C. sativa subsp. indica (Lam.) E. Small & Cronq. with more than 0.3% THC. This classification has since been adopted in the European Community, Canada, and parts of Australia as a dividing line between cultivars that can be legally cultivated under license and forms that are considered to have too high a drug potential. For a period, 0.3% was also the allowable THC content limit for cultivation of hemp in the Soviet Union. In the US, Drug Enforcement Agency guidelines issued Dec. 7, 1999 expressly allowed products with a THC content of less than 0.3% to enter the US without a license; but subsequently permissible levels have been a source of continuing contention. Marijuana in the illicit market typically has a THC content of 5% to 10% (levels as high as 25% have been reported), and as a point of interest, a current Canadian government experimental medicinal marijuana production contract calls for the production of 6% marijuana. As noted above, a level of about 1% THC is considered the threshold for marijuana to have intoxicating potential, so the 0.3% level is conservative, and some countries (e.g. parts of Australia, Switzerland) have permitted the cultivation of cultivars with higher levels. It should be appreciated that there is considerable variation in THC content in different parts of the plant. THC content increases in the following order: achenes (excluding bracts), roots, large stems, smaller stems, older and larger leaves, younger and smaller leaves, flowers, perigonal bracts covering both the female flowers and fruits. It is well known in the illicit trade how to screen off the more potent fractions of the plant in order to increase THC levels in resultant drug products. Nevertheless, a level of 0.3% THC in the flowering parts of the plant is reflective of material that is too low in intoxicant potential to actually be used practically for illicit production of marijuana or other types of cannabis drugs. Below, the problem of permissible levels of THC in food products made from hempseed is discussed.
With that stereotype now changing in addition to the outbreak of legal marketplaces in 33 states, we’re seeing a boom in cross-industry trends where major corporate and investment players are starting to enter the cannabis sector or at least signal willingness to do so. These trends are proving so strong that companies are starting to think it’s important to get in the game or risk being left behind later. That’s why major brands are either dipping a toe into the water or laying the groundwork for a cannonball-level splash when the Green Rush finally breaks.
But experimental anxiety, which is when stressors are applied to make a volunteer feel anxious for a test, is different than clinical anxiety, and long-term, rigorous clinical trials are necessary to find CBD’s real-life effects on patients. Several are under way right now, including one Blessing is conducting at NYU, but the process of completing those, finding appropriate dosages, and creating a consistent drug that can meet Food and Drug Administration approval standards takes time. “Getting into the full pipeline of FDA approval is probably eight to 10 years away,” Blessing says.
Chronic pain represents an emerging public health issue of massive proportions, particularly in view of aging populations in industrialized nations. Associated facts and figures are daunting: In Europe, chronic musculoskeletal pain of a disabling nature affects over one in four elderly people (Frondini et al 2007), while figures from Australia note that older half of older people suffer persistent pain, and up to 80% in nursing home populations (Gibson 2007). Responses to an ABC News poll in the USA indicated that 19% of adults (38 million) have chronic pain, and 6% (or 12 million) have utilized cannabis in attempts to treat it (ABC News et al 2005).
Several studies have demonstrated the therapeutic effects of cannabinoids for nausea and vomiting in the advanced stages of illnesses such as cancer and AIDS. Dronabinol (tetrahydrocannabinol) has been available by prescription for more than a decade in the USA. Other therapeutic uses of cannabinoids are being demonstrated by controlled studies, including treatment of asthma and glaucoma, as an antidepressant, appetite stimulant, anticonvulsant and anti-spasmodic, research in this area should continue. For example, more basic research on the central and peripheral mechanisms of the effects of cannabinoids on gastrointestinal function may improve the ability to alleviate nausea and emesis. More research is needed on the basic neuropharmacology of THC and other cannabinoids so that better therapeutic agents can be found.
About 9% of those who experiment with marijuana eventually become dependent according to DSM-IV (1994) criteria.[78] A 2013 review estimates daily use is associated with a 10-20% rate of dependence.[42] The highest risk of cannabis dependence is found in those with a history of poor academic achievement, deviant behavior in childhood and adolescence, rebelliousness, poor parental relationships, or a parental history of drug and alcohol problems.[138] Of daily users, about 50% experience withdrawal upon cessation of use (i.e. are dependent), characterized by sleep problems, irritability, dysphoria, and craving.[117] Cannabis withdrawal is less severe than withdrawal from alcohol.[139]
In this report, researchers reviewed 16 previously published studies testing the use of various cannabis-based medicines in the treatment of chronic neuropathic pain and found some evidence that cannabis-based medicines may help with pain relief and reduce pain intensity, sleep difficulties, and psychological distress. Side effects included sleepiness, dizziness, mental confusion. The authors concluded that the potential harm of such medicines may outweigh their possible benefit, however, it should be noted that the studies used a variety of cannabis-based medicines (e.g. inhaled cannabis and sprays and oral tablets containing THC and/or CBD from plant sources or made synthetically), some of which are more likely to result in these side effects than products without THC.
×